At 160,000 miles or 16 years

High Mileage Required Service Work
At 160,000 miles or 16 years; then every 20,000 miles or 2 years

- Engine oil and filter change
- Check catch, safety catch and hinges on engine hood for proper operation
- Check condition of poly-V-belt
- Replace brake fluid

Check the following fluid levels, correct if necessary.
If there is a loss of fluid, determine cause and perform repair with separate work order
- Check coolant level
- Brake system
- Differential lock mechanism fluid
- Transfer case
- Front axle
- Rear axle
- Windshield washer system

Reset maintenance service indicator in instrument cluster

Function check
- Parking brake (function test only)
- Differential / transfer case lock mechanisms (front, rear, center)

Replace dust filter
Check thickness of brake pads, front and rear
Correct tire inflation pressure and enter in bar or psi:
Check inflation pressure in spare tire (if applicable) and enter in bar or psi:

Leakage - Major components
Check underbody and engine compartment for chafe marks, line routing, damaged components. In the event of leakage, determine cause and perform repair with separate work order.

Visually inspect condition of steering mechanical components, rubber boots
Bolts attching steering (check / tighten)
Joint housing of AWD front axle - Inspect grease packing and correct