AZ82.60-P-0001-02RT Retrofit iPod Wiring Harness

AZ82.60-P-0001-02RT Retrofit iPod Wiring Harness
- except CODE (498) Japan version

1 Make hole (15) in glove compartment (9) as per the dimensions.

Component Identification:

2 Install interface connector (5) on iPod wiring harness (1) through passage into glove compartment (9) and plug with grommet (6).
3 Route wiring harness iPod (1) in the glove compartment (9) as per the picture.
4 Fasten the wiring harness iPod (1) in the glove compartment (9) with two felt strips (17) as per the picture (9).

5 Route interface connector (5) from iPod wiring harness (1) into radio recess and reinstall glove compartment.

Ensure that the wiring harness iPod (1) is not pinched when installing the glove compartment (9).