GF07.61-P-2005G ME-SFI Driving Mode, Function

GF07.61-P-2005G ME-SFI Driving Mode, Function
ENGINE 273 in MODEL 463.202 /222 /236 /237 up to 31.5.12
- as of model year 2009
/YoM 08

Function requirements for driving mode for the ME gasoline injection and ignition system (motor electronics) (ME), general points
^ Circuit 87M ON (engine control ON)
^ Engine running

Driving mode, general points
The following partial functions are active in driving mode and are described in the following documents:
^ ME-SFI fuel supply, function
^ ME-SFI injection regulation, function
^ Motor electronics (ME) ignition system, function
^ ME-SFI Start, post-start phase and warm-up enrichment, function
^ ME-SFI alternator interface function
^ ME-SFI engine speed signal, function
^ ME-SFI maximum engine speed limitation, function
^ ME-SFI limiting maximum vehicle speed, function
^ ME-SFI safety fuel shutoff, function
^ Intake manifold switchover function
^ ME tumble flap switchover function
^ ME-SFI lambda control, function
^ ME-SFI two-sensor control, function
^ ME-SFI oxygen sensor heater function
^ Self-adjustment of mixture formation, function
^ Smooth engine running analysis, function
^ ME-SFI thermal management, function
^ ME-SFI engine torque requests function
^ ME-SFI overrun fuel shutoff, function
^ Camshaft adjustment, function
^ ME-SFI transmission shift delay, function
^ ME-SFI knock control function
^ Overheating/pinging protection, function
^ Air injection, function
^ ME-SFI electronic accelerator, function
^ Electronic accelerator pedal emergency running mode, function
^ Purging function
^ System purging with leak test function (with code (ZU8) USA version)
^ Monitoring catalytic converter efficiency, function