AZ82.60-P-0015-02CWB Retrofit Rear Entertainment Wiring Harness

AZ82.60-P-0015-02CWB Retrofit Rear Entertainment Wiring Harness
MODEL 204.9
- with CODE (866) Preinstallation for rear entertainment system
- Rear-seat entertainment with dual screens





000 589 13 99 00
Wiring harness repair kit, basic





220 589 04 99 00
New passenger vehicle wiring harness repair kit





Connection scheme
3 Screen (left)
4 Screen (right)
7 Wiring harness (left screen)
7.1 White 8-pin plug
7.2 White 8-pin connector
8 Wiring harness (right screen)
8.1 White 8-pin plug
8.2 White 8-pin connector
9 White 8-pin connector (left vehicle wiring harness)
10 White 8-pin connector (right vehicle wiring harness)
N10/2 Rear SAM control unit with fuse and relay module
rt/gn Red/green line





1 Remove green fuse carrier (2) from rear SAM control unit with fuse and relay module (N10/2) and turn over.
2 Remove red/green line (RD/GN) from contact cavity 6 of green fuse carrier (2).
The contact cavities are labeled.
3.1 Install red/green line (RD/GN) in contact cavity 3 (arrow) of green fuse carrier (2).
On vehicles without code (359) TELEAID emergency call system.
The contact cavities are labeled.





3.2 Connect red/green line (RD/GN) using solder connector (22) to black/yellow line (BK/YE).
On vehicles with code (359) TELEAID emergency call system.
The black/yellow line (BK/YE) is installed in contact cavity 3 of the green fuse carrier. The contact cavities are labeled.





4 Fit green fuse carrier (2) onto rear SAM control unit with fuse and relay module (N10/2).
5 Install a fuse with a 7.5 A rating in contact cavity 3 (arrow) of the green fuse carrier (2). The contact cavities are labeled.





6 Connect white 8-pin connector (10) of vehicle wiring harness to white 8-pin plug (8.1) of wiring harness (8).
Illustrated on right side of vehicle. Installation on the left side of the vehicle is performed correspondingly.