AZ82.60-P-0015-02CWC Retrofit Rear Entertainment Wiring Harness

AZ82.60-P-0015-02CWC Retrofit Rear Entertainment Wiring Harness
MODEL 204.9
- with CODE (866) Preinstallation for rear entertainment system
- with a display screen





000 589 13 99 00
Wiring harness repair kit, basic





220 589 04 99 00
New passenger vehicle wiring harness repair kit





Connection scheme
4 Screen (right)
8 Wiring harness (right screen)
8.1 White 8-pin plug
8.2 White 8-pin connector
10 White 8-pin connector (right vehicle wiring harness)
N10/2 Rear SAM control unit with fuse and relay module
rt/gn Red/green line





1 Remove green fuse carrier (2) from rear SAM control unit with fuse and relay module (N10/2) and turn over.
2 Remove red/green line (RD/GN) from contact cavity 6 of green fuse carrier (2).
The contact cavities are labeled.
3.1 Install red/green line (RD/GN) in contact cavity 3 (arrow) of green fuse carrier (2).
On vehicles without code (359) TELEAID emergency call system.
The contact cavities are labeled.





3.2 Connect red/green line (RD/GN) using solder connector (22) to black/yellow line (BK/YE).
On vehicles with code (359) TELEAID emergency call system.
The black/yellow line (BK/YE) is installed in contact cavity 3 of the green fuse carrier. The contact cavities are labeled.





4 Fit green fuse carrier (2) onto rear SAM control unit with fuse and relay module (N10/2).
5 Install a fuse with a 7.5 A rating in contact cavity 3 (arrow) of the green fuse carrier (2). The contact cavities are labeled.





6 Connect white 8-pin connector (10) of vehicle wiring harness to white 8-pin plug (8.1) of wiring harness (8).
Illustrated on right side of vehicle. Installation on the left side of the vehicle is performed correspondingly. Beforehand, you must clarify with the customer on which side of the vehicle the screen is to be installed.