AZ82.80-P-0002-02CY Retrofit InCar Hotspot Holder

AZ82.80-P-0002-02CY Retrofit InCar Hotspot Holder






1 Note "WPA" number of InCar Hotspot (1) on back of operator's manual.
The operator's manual is included in the installation kit. Only note the "WPA" number if this has not yet been attached to the rear of the operator's manual in the form of a sticker. The "WPA" number of the InCar Hotspot (1) is on the model plate.






2 Place bracket (17) on rear of InCar Hotspot (1), as shown, and screw in place using screws/bolts (16).






3 Detach insulation mat (18) from panel.






4 Connect cellular telephone system splitter/InCar Hotspot antenna line (3) and power supply wiring harness (6) to InCar Hotspot (1).






5 Place InCar Hotspot (1) with locking clips of bracket on panel (19) and engage.
Ensure that locking clips are seated correctly in panel (19).