Body - Liftgate Stops Near The Bottom When Opening
Liftgate does not open fullyTopic number LI72.20-P-049304
Version 1
Design group 72.20 Rear door, tailgate
Date 04-07-2010
Validity MODEL 204.9 up to VIN end number 472427 with code 890
Reason for change
Reason for block
Complaint:
The liftgate stops near the bottom during the opening process.
Cause:
Parameters for obstruction detection set too sensitive.
Remedy:
Perform coding in liftgate control (HKS) control unit (N121/1).
The coding occurs automatically on initial startup of the HKS control unit, which is performed with Xentry Diagnostics by accessing the screen "Control unit view => HKS - Liftgate control (N121/1) => Adaptations => Initial startup".
Note:
The new coding is available as of SDS Version 03/10.
Symptoms
Control unit/fault code
Validity