AP82.10-P-8260-02GX Check Setting Of High Beam

AP82.10-P-8260-02GX Check Setting Of High Beam

DANGER: Risk of death caused by high voltage at xenon headlamps. Risk of explosion/risk of fire caused by highly flammable materials in the vicinity of damaged xenon bulbs. Risk of injury caused by UV light, hot components at xenon headlamps and glass splinters produced by bursting xenon bulbs. Risk of poisoning caused by inhalation of mercury vapors and by toxic salts and mercury compounds being ingested or coming into contact with skin

Do not come into contact with parts that are under high voltage. Persons with active electronic implants (e.g. heart pacemakers) must never work on xenon headlamps. Switch off entire lighting system. Wear insulated safety shoes, safety glasses and protective gloves. AS82.10-Z-0001-01A

Remove highly inflammable materials from the hazard area. Ensure sufficient ventilation in the working area.






1 Check low beam setting.
The center of the light beam must lie on the central mark (6) in the headlamp aimer.
Do not perform any correction at the adjustment screws of the headlamps, as in the process the previously adjusted low beams is adjusted again
Vehicles without xenon headlamp unit: In the event of a deviation check the correct seat of the bulb in the headlamp.