AN82.60-P-0016-02GY Retrofit Media Interface Wiring Harness

AN82.60-P-0016-02GY Retrofit Media Interface Wiring Harness
- except CODE (523) MB Audio 20 radio


1 Disconnect old interior MOST carrier element (1) and radio MOST carrier element.

Mask off old MOST carrier element so that it is not used again.

2 Connect new interior MOST carrier element (2) to interior line (3).
3 Route new fiber optic cable (4) from A-pillar to radio opening and fasten with adhesive tape (5).

Route fiber optic cable (4) along air conditioning air duct (6). Ensure that MOST carrier elements for radio, for media interface (7) and for interior (2) are positioned correctly. Connectors are marked on the fiber optic cable.







4 Connect radio MOST carrier element with radio coupling.
5 Disconnect electrical connector (8) of media interface power supply from instrument panel carrier.