AZ82.80-P-0003-02GZA Retrofit Wiring Harness For Tablet PC Mount

AZ82.80-P-0003-02GZA Retrofit Wiring Harness For Tablet PC Mount
- MODEL 164.1## /8## 1#
with CODE (275) Memory package (driver seat, steering column, mirrors) bei Einbauort Fahrersitz

Connection scheme






2 Tablet PC control unit mount
3 Tablet PC mount
6 Wiring harness (Tablet PC mount)
6.1 White 8-pin plug
6.2 Black 3-pin coupling
9 Wiring harness (control unit)
9.1 White 8-pin coupling
10 Black 4-pin coupling (vehicle wiring harness)
24 Black 4-pin plug
25 Black 4-pin coupling (control unit wiring harness)
N32/2 Front passenger front seat adjustment control unit with memory

Routing diagram






2 Tablet PC control unit mount
3 Tablet PC mount
6.1 White 8-pin plug
6.2 Black 3-pin coupling
9.1 White 8-pin coupling
24 Black 4-pin plug
N32/2 Front passenger front seat adjustment control unit with memory

The following operation steps are shown on the right side of the vehicle and can be accomplished analogously on the left side of the vehicle.






1 Connect wiring harness (9) to Tablet PC control unit mount (2) and route to passenger-side front seat adjustment control unit with memory (N32/2).
2 Fasten wiring harness (9) to seat frame using cable ties and strap down any excess line length.
The white 8-pin coupling (9.1) and the black 4-pin plug (24) will be connected at a later stage.
Fasten wiring harness (9) to seat such that unrestricted adjustment of the seat is possible. Otherwise the wiring harness (9) may be sheared off or crushed.






3 Route wiring harness (6) from previously created opening in backrest to Tablet PC control unit mount (2).
4 Connect white 8-pin coupling (9.1) to white 8-pin plug (6.1).
5 Fasten the wiring harness (6), the white 8-pin plug (6.1) and the white 8-pin coupling (9.1) using a cable tie to the seat frame and strap down any excess line length.






6 Detach black 4-pin coupling (10) of vehicle wiring harness from passenger-side front seat adjustment control unit with memory (N32/2) and connect to black 4-pin plug (24) of wiring harness (9).
7 Plug black 4-pin coupling of wiring harness (9) instead of black 4-pin coupling (10) onto passenger-side front seat adjustment control unit with memory (N32/2) on outer left slot.
8 Fasten wiring harness (9) to seat frame using cable ties and strap down any excess line length.