AR01.10-P-0010-01GZ Connect Compression Tester

AR01.10-P-0010-01GZ Connect compression tester

Special Tools:

Component Identification:

1 Remove cover (1) of left fuse and relay box in the engine compartment.

Installation: Check rubber seal in cover (1) and replace if necessary. The cover (1) must be seated in the groove.

Illustrated on model 164.175

Component Identification:

2 Detach starter relay (2) from socket.

Illustrated on model 164.175

Component Identification:

3 Plug corresponding adapter line from electrical connection kit into socket of relay base (see arrow).
4 Connect adapter line to compression tester line.
5 Clip terminal clamp (4) of compression tester onto connection (5).

Illustrated on model 164.175