Procedures

AN82.62-P-0001-04GZ Retrofit Antenna Line

1 Connect electrical connector (1) of antenna line (2) to GPS antenna (A2/93a6).
2 Route antenna line (2) alongside wiring harness (3) to left D-pillar.
3 Fasten antenna line (2) with cable tie (4).







4 Route antenna line (2) alongside wiring harness (5) to C-pillar.
5 Fasten antenna line (2) with cable tie (6).










6 Route antenna line (2) alongside wiring harness (7) to rear door.

Shown on model 164.8 except code (582) Rear air conditioning. With code (582) Rear air conditioning:
^ Model 164.8: Route antenna line (2) below rear air conditioner housing.

7 Fasten antenna line (2) with cable tie (8) or adhesive tape.
8 Route antenna line (2) alongside cable duct (9) to A-pillar.

Ensure that antenna line (2) cannot be kinked.

9 Route antenna line (2) below instrument panel (10) to radio opening.
10 Fasten antenna line (2) with cable tie (8) and adhesive tape.