Front Axle

AR33.10-P-0100-01GZ Attaching engine supporting frame and lifting engine

Component Identification:

1 Remove engine trim panel (1)
2 Position engine support frame (2) on inner flanges of fenders and position front supports directly next to rubber scoops on left and right-hand side.

Position front supports as close as possible to rubber scoops, otherwise load on radiator crossmember will be too great.

2 Engine support frame
3 Adjust engine support frame (2) such that all supports make contact with fender flange and radiator crossmember.
4 Attach engine to eyelet and lift using spindle until front engine mount is fully relieved of load.