Glove Compartment Lid, Removal/Installation
Removal and installation of glove compartment lidRemoval
1 Unscrew tour screws on inside of lid.
2 Remove both slotted nuts, using a standard slotted nut wrench.
3 Position outer side retaining pin upright.
4 Pull side pin out of glove compartment lid.
Note: Since pin has a lock on one side, it could be necessary to turn pin by one half turn to remove.
5 Remove outer stop bracket.
6 Lift inner part of glove compartment lid off of foam rubber part.
7 Run lower part with pins out of hinges.
8 Lift inner stop bracket with glove compartment lid upper section out of instrument panel.
Installation
9 Install in reverse sequence.