Condenser Fan: Service and Repair
Removal and Installation of Auxiliary FanData:
Power Input: 180W
Fan speed at 12 V:
Power Input: 2300/mm
Removal:
1. Disconnect battery
2. Pull double coupling on stiffening (24) at front in engine compartment from clip (22) and loosen plug connection.
Layout of plug connection for auxiliary fan on stiffening front right
17 Cable band
22 Clip
20 Harness
24 Stiffening at front
3. Expose harness (20) up to auxiliary fan (4) while opening cable bands (17).
4. Unscrew both clips (14) left and right on auxiliary fan and remove auxiliary fan.
On vehicles with strut in front of fan unscrew strut first.
1 Auxiliary fan
2 Condenser
3 Receiver dehydrator
4 Temperature switch
Installation:
5. Screw auxiliary fan with the two fastening clips (14) and combination screws (15) to struts (13).
6. Attach harness with cable band (17) to righthand strut (13) and to stiffening at front.
7. Connect two-way plug of auxiliary fan to double coupling of harness and mount with clip (22).
8. Check auxiliary fan for function, by switching-on ignition and shorting the two flat plugs on temperature switch (3). Pay attention to direction of rotation of fan.