Removal and Installation

Removal





Drain plug on cylinder crankcase (arrow)

1 Completely drain coolant. Service and Repair
2 Remove fan with viscofan coupling.
3 Remove alternator V-belt and coolant pump pulley.






4 Unscrew coolant pump and remove.

Installation
5 Position coolant pump with new gasket and tighten fastening screws to 10 Nm.
6 For further installation proceed vice versa to removal.
7 Tension alternator V-belt. Service and Repair
8 Pressure test cooling system with tester (approx. 1 bar gage pressure).