| Height of Cylinder Crankcase When New | | 242.9 - 242.8 Millimeter (mm) |
| Minimum Height Following Required Removal of Material | | 242.5 Millimeter (mm) |
| Permissible Unevenness of Parting Surface | In Logitudinal Direction | 0.10 Millimeter (mm) |
| In Transverse Direction | 0.05 Millimeter (mm) |
| Permissible Roughness of Upper Parting Surface | | 0.006 - 0.016 Millimeter (mm) |
| Permissible Deviation in Parallel of Upper Parting Surface in Relation to Longitudinal Direction | | 0.1 mm |
| Pressure-Test with Air Under Water in Bar Gauge Pressure | | 2.0 |
| Chamfer of Cylinder Bores | | See Service and Repair |