General

Data:
Designation
- electromagnetic shutoff clutch 12 V, Frigidaire 5 inch
Power input at 13.5 V
- cold 3.0 amps
- warm 2.5 amps
Tightening torque
- Counter nut to shaft 20 Nm

Special Tools:
Special wrench for counterholding spring plate
- 116 589 10 07 00
Remover for spring plate
- 000 589 07 35 00
Installer for spring plate
- 000 589 49 43 00
Puller
- 000 589 88 33 00
Thrust piece for puller
- 116 589 05 63 00
Mandrel for pulley
- 115 589 02 35 02
Remover and installer for slip ring
- 000 589 21 61 00
Remover and installer for shaft sealing ring
- 000 589 65 63 00
Holding device for refrigerant compressor
- 109 589 00 31 00

Conventional Tools:
Slip gauges 0.05-1.00 mm
- order no. 2147 e.g. made by Hazet, D-5630 Remscheid 1
Pliers for internal lock
- order no. 1846b-2 e.g. made by Hazet, D-5630 Remscheid 1
Pliers for external lock
- order no. 1846d-2 e.g. made by Hazet, D-5630 Remscheid 1

NOTE: Removal and installation of spring plate with pulley and clutch coil, as well as of shaft seal, can be performed only with refrigerant compressor removed.