Vehicle Speed Sensor: Service and Repair

1. Disconnect the negative battery terminal.

Removing Steering Wheel:

2. Remove the company symbol (18) from the steering wheel pad (25) with a small screwdriver.

CAUTION: To prevent damage, do not pull the pad (25) from the horn carrier.

Remove The Countersunk Screw From The Steering Shaft:

3. Lock the steering wheel and remove the countersunk screw (10) from the steering shaft.
4. Remove the steering wheel from the steering shaft.
5. Detach the speedometer shaft at the transmission.

Instrument Cluster Removal:

6. Remove the speedometer shaft from the clip at the front cover, over the foot pedals; the shaft will move with the instrument panel.
7. Carefully slide special tool No. 126 589 03 33 00 between the dash padding and the instrument cluster and rotate 90°.
8. Pull the instrument cluster out; paying close attention to the speedometer shaft.
9. Unscrew speedometer shaft on the speedometer and remove the electric lines.

Hall Sensor Location:

10. Remove the Hall sensor (B6).
11. Reinstall in reverse order.