Remove/Install Driver's Seat Height Adjustment

Removing and Installing Driver's Seat Height Adjustment






Driver's or front passenger seat, remove and install (91-100 or 91-110).

Handwheel (1), trim parts (2) and (3), force off

Spring (4) and (5), remove - install 2 each

Lock (arrows), disengage and remove and install shaft (6) for adjusting tilt

Rivet (7), drill out 1 each; during installation, replace rivet with screw M6x10 and nut M6

Screw (8), remove and install 4 each on backrest fitting and remove driver's backrest

Seat height adjustment of cushion frame, remove

For installation proceed vice versa.