Cylinder Block Assembly: Tools and Equipment

Commercially Available Tools

Automatic cylinder reconditioning machine SUNNEN CK-10-G or CV 616 with honing oil filter and oil cooler

Honing head CK 3000 or CK 2600 for 76 - 127 mm dia.

SUNNEN honing oil MB 30 1)

Prehoning wheel set C 30-A 53, 70 mm long 2)

Finish honing wheel set C 30-J 84, 70 mm long 2)

Polishing wheel set C 30-C 03-81

Wheel holder for felt element CK-30 35

Felt element holder set CK-31 30

Felt element C-30 F 85

SUNNEN silicon paste AN-30

Box for silicon paste and filter elements AN-35

Inside measuring instrument for 50 to 150 mm dia., with 0.01 mm gauge and measuring point pressure relief, e.g. SUNNEN GRM 125

Setting micrometer for inside measuring instrument GAM 2125 with setting range 50 - 200 mm. elg. SUNNEN CF-1000 M

1) When refilling approx. 170 litres.
2) These wheels are available in a length of 89 mm only and must be shortened with a hacksaw to 70 mm (see step 3 of procedure. Service and Repair).


Federal Republic of Germany:
e.g. Hommel Handel GmbH

Other Countries:
e.g. SUNNEN Products Company
USA-7910 Manchester
St. Louis, Mo. 63143

Hommel Handel Export Division
P.O. Box 1206
D-6806 Viernheim