Test 6

TEST 6:

Test 2:

Pushbutton Control Unit:

Test Conditions:
Selector Dial: 22°C
Function Button: "c"
Blower: "AUTOM"
- Set up condition "mode change" (overlap) by slowly turning temperature dial in upward or downward direction until leg room flaps and center nozzles are open. Wait until blower has switched to 2.8 A or 2nd stage.

2.8 A on blower = preparation for next test!

Test Results/Observations:
- Monovalve cycling (every 4 to 5 seconds). At temperatures > 25°C.
- Compressor switched on at outside temperatures 22°C.
- Main air flaps open.
- Recirculating pump running.