Coupe

Removal and Installation of Drivers Seat

1 Slide driver's seat toward the rear and height adjusting device in downward direction.





2 Force off front cover by means of plastic wedge.





3 Unscrew front screw on both seat guide rails.

4 Slide driver's seat forward and height adjusting device in upward direction.





5 Unscrew rear screw on both seat guide rails.





6 Force off cover above guide rail and unscrew screws.

7 Pull slide rail toward the rear out of belt buckle.





8 Tilt driver's seat slightly toward the rear and separate electric plug connection as well as vacuum line. Open cable strap.

9 Remove driver's seat.

10 Install driver's seat in vice-versa sequence.