Computers and Control Systems: Technical Service Bulletins
- Recalls
- Customer Interest
- By Symptom
- Customer Interest
- Driveability
- Engine - Stalls Then Restarts/Cuts Out During Coasting
- Engine - Hesitates/Cuts Out/Quits/Difficult to Start
- Stalling and/or Cutting Out Complaints
- Engine Hesitates, Cuts Out, Hard Start
- Engine Cuts-Out, Cannot Be Restarted
- On-Off Ratio Won't Adjust After Repair, MIL on
- Engine Surges at Idle at Operating Temp.
- Erratic Operation
- Erratic Shifting
- False instrument warning light/gauges
- Inoperative
- Out of specification
- Poor performance
- Recalls
- Starting problems
- All Technical Service Bulletins
- Engine Control - Engine Control Module (N3/10) Flashing
- Cruise Control Inoperative
- Hand-Held Tester (HHT) - Updated Modules
- Policy - HHT Warranty & Precautions
- Battery - Parasitic Drain With Ignition OFF
- Scan Tool (Impulse Counter ) - Failure, Improper Hook-Up
- EGR Valve - Testing
- Policy - Fluke Meter Approved
- Engine - Stalls Then Restarts/Cuts Out During Coasting
- Engine - Hesitates/Cuts Out/Quits/Difficult to Start
- Stalling and/or Cutting Out Complaints
- Engine Hesitates, Cuts Out, Hard Start
- Air/Fuel Mixture - Checking Lambda System
- Control Module - (CIS-E) Corrected Current to EHA
- MIL ON ON/OFF Ratio Unadjustable After Repair Work
- Campaign - CIS-E Control Unit False Fault Code 16
- O2 Sensors - Avoiding Bogus Test Results
- Engine Cuts-Out, Cannot Be Restarted
- On-Off Ratio Won't Adjust After Repair, MIL on
- Engine Does Not Start
- Engine Surges in Idle at Operating Temperature
- Engine Surges at Idle at Operating Temp.