91-070 Remove/Install Side Covering on Outside of Seat Cushion Frame

91-070 Removing And Installing Side Covering On Outside Of Seat Cushion Frame







Removal, installation







1 Unscrew screw (arrow).







2 Push out plug (arrow) and unscrew screw below.
3 Pull covering off of lower rear covering.







4 Pull covering at front upward out of guide in seat frame and remove toward front.







5 Unscrew screw on belt end fitting and remove covering.







Installation note
When screwing on belt guide fitting, ensure that collar nut is installed in correct position (arrow).
Tightening torque: 40 Nm.