AR32.25-P-0110A Remove/Install Rear Shock Absorber

AR32.25-P-0110A Remove/Install Rear Shock Absorber
- except CODE (P98) Black Series [model 209]
- except CODE (489) All-round level control system [model 210]







DANGER:
- Risk of death. Death may result if vehicle slips or topples from the lifting platform.
- Align vehicle between the columns of the lifting platform and position the four support plates at the lifting platform support points specified by the vehicle manufacturer.

CAUTION: Installation: Replace self-locking nuts and bolts.

1 Detach upper shock absorber mounting

NOTE: The vehicle must be standing on its wheels when removing the upper shock absorber mounting.

2 Remove plate (75b) and rubber mount (75c)
3 Raise vehicle.
4 Remove rear axle switch for roll bar
5 Remove spring link cover (72c).
6 Detach damper (75) from spring link
7 Remove attaching parts (75k, 75d, 75f, 75i) of damper (75)
8 Shock absorber inspection
9 Install in the reverse order