AR42.10-P-0260A Cleaning Brake Discs With Cleaning Pads

Removal and Installation:




1 Remove front and rear brake pads in axle sets. Only fit cleaning pads to one axle in each case.
2 Drive vehicle at approx. 30 km/h for a distance of 300 meters, pressing the brake pedal several times applying slight pressure with the foot.
Do not use a roller test bench and brake test bench for cleaning brake discs.

WARNING: The braking effect is severely restricted by the cleaning pads.

3 Install in reverse sequence.

Cleaning Pad Application:

Cleaning Pads:

To help determine model number of vehicle in question, Application and ID Note that this list (below) contains all models including non-USA market vehicles.

Part number 129 589 00 28 00
Front:
Models 129, 210.072/270/272
Model 210.072 except AMG engineering package
Models 208.370/470 except code 491 (USA)
Model 210.070
except code (498) Japan
except code (625) Australia
except code (491) USA

Part number 124 589 00 28 00
Front:
Models 202.018/0202/022/023/078/080/083/120/121/122/125/133/180/182/193
Model 202.028 up to 8/31/95 except AMG.

Part number 210 589 00 28 00
Front:
Models 170.435/445/447, 202.024/025/026/029/082/085/086/089/128/188, 208.335/345/347/365/435/445/447/465
Model 202.028 as of 9/1/95
Models 210.00/01/02/035/037/04/05/06/08/20/21/22/23/24/26/28/60/61/663 except AMG engineering package
Model 210.070
with code (498) Japan
with code (625) Australia
with code (491) USA
Models 208.370/470 with code 491 (USA)

Part number 140 589 00 28 00
Front:
Model 140 with 2-piston fixed caliper.

Part number 140 589 01 28 00
Front:
Model 140 with 4-piston fixed caliper

Part number 124 589 01 28 00
Rear:
Models 129, 170, 202, 208 210 only with two retaining pins on fixed caliper.

Part number 140 589 02 28 00
Rear:
Model 140