Cranking Engine Using A Remote Starter Button

- Switch ignition off.
- Detach cover over engine component compartment.
- Unplug connector of plug connection (X27).
- Connect alligator clip (A) of compression tester, special tool 001 689 77 21 00, at pin 1 of connector (S).
- Open cover of terminal block (X4/10)
- Connect alligator clip (B) of compression tester at the terminal block (X4/10).
- With parking brake applied, crank engine in idle speed position by pushing contact handle (arrow) on compression tester.

CAUTION: Do not crank engine using ignition starter switch.