Oxygen Sensor

Oxygen Sensor Heater Resistance 3 ohms (cold) 13 ohms (hot)
Oxygen Sensor Operating Voltage (engine running) 0.4 - 1.0 volts
Oxygen Sensor Heating Element current draw 0.5 - 1.3 A


Tune-up Specifications

Firing Order 1-5-4-8-6-3-7-2
Idle Speed 550-650 RPM [1]
Timing 0 +3 /- 1° BTDC [2]
Air/fuel Mixture Readout oscillating [3]

[1] Automatic Transmission in Drive
[2] Reference figure at cranking speed only, not adjustable
[3] At Diagnostic socket, with on/off ratio tester, and O2 sensor connected