Operation CHARM: Car repair manuals for everyone.

Connecting Rod Bearing Cap Torque


NOTE:
- Lubricate all bolt threads and bearing surfaces with engine oil before installation.
- Do Not use flexi beam type torque wrench for angle tightening phase.

First Version Bolt





New Bolts (First Tightening): 55 Nm
- Tightening angle 90 - 100°
Retightened Bolts: 45 Nm
- Tightening Angle: 90°

CAUTION: It is essential to observe these instructions otherwise the nuts or conrod bolts may slacken.

NOTE: 2nd version and 3rd version bolts arenot applicable to 119.960.