Starter Motor

32
Starter To Ring Gear Clearance Specifications
Rear Edge Of Crankcase To Front Edge Of Ring Gear 14.3 to 15.2 mm
No. Of Shims Fitted 0
Rear Edge Of Crankcase To Front Edge Of Ring Gear 13.3 to 14.2 mm
No. Of Shims Fitted 1
Rear Edge Of Crankcase To Front Edge Of Ring Gear 12.3 to 13.2 mm
No. Of Shims Fitted 2

Dimensional Specifications
Permissible Variation:
Concentricity At Ring Gear 0.30 mm
Centering Collar Diameter
For Driven Plate (1.5 mm Thick) 296.00 - 296.05 mm


NOTE: Crankshaft bolts are microencapsulated, use only once.