Air Injection Pump Relay: Description and Operation

Fig. 20 Air Injection System Pump Relay Location:

Air Injection takes place only when the coolant temperature is between 17°C (63°F) and 70°C (158°F), the engine speed is less than 2500 RPM, the full load contact is not closed, and the oxygen sensor is not in closed loop operation. Under these conditions the electromagnetic clutch of the air pump is switched on by the CIS-E control unit via the air injection relay. The injection relay simultaneously powers the change-over valve which provides vacuum to the air shut-off valve in the pump circuit. Air is then pumped through the check valve and into the exhaust ports of the cylinder heads.