Remove/Install Antenna - With D-Network

Removing And Installing Antenna

Installing Rear Antenna:

Installing Roof Antenna 208, 210:

Installing Rod Antenna:

1 Remove antenna rod (9)
2 Remove cover on left wheel house recess
3.1 Open side trim in right rear
3.2 Remove side trim in trunk
4 Disconnect ground cable of support plate (7)
5 Remove tuner/amplifier (trunk) (A2/3)
6 Disconnect antenna cable and unscrew nut (6)
- On rear/rod antenna
7.1 Remove support plate (7) and antenna base (8)
- On rear antenna
7.2 Remove antenna base (8) inwards
8 Loosen roof trim at rear
9 Pull grommet (1) off roof antenna (A2/22)

NOTE: Installation note: E3 Install grommet (1) using special tool

"Special Tool - Assembly Tool II" given below.

10 Unlock roof antenna with special tool and remove downwards.

See "Special Tools- Assembly Tool I" given below.

11 Install in reverse order

Special Tools

Special Tools: