A L L Diagnostic Trouble Codes ( DTC )

• Testing and Inspection
  • B Code Charts
    • B1000
    • B1010
    • B1011
    • B1057
    • B1074
    • B1088
    • B1761
    • B1764
    • B1768
    • B1782
  • Manufacturer Code Charts
    • CD Changer (CDC)
    • Powertrain Management
      • CC/ISC (Cruise Control/Idle Speed Control) - Without ASR
        • Codes Using Hand-Held Tester (HHT)
        • Codes Using Impulse Counter Scan Tool
        • Preparation For Test
        • Explanation of Symbols Used
        • Component Locations
        • CC/ISC Test Steps (=>)
      • DM (Diagnostic Module)
        • DM (Diagnostic Module) Code Index
        • DM (Diagnostic Module) - California Vehicles
          • Preparation For Test
          • Explanation of Symbols Used
          • Component Locations
          • DM Test Steps (=>)
      • EA/CC (Electronic Accelerator/Cruise Control) - With ASR
        • Codes Using Hand-Held Tester (HHT)
        • Codes Using Impulse Counter Scan Tool
        • Preparation For Test
        • Explanation of Symbols Used
        • Component Locations
        • EA Test Steps (=>)
        • CC Test Steps (=>)
      • HFM-SFI (Sequential Multiport Fuel Injection and Ignition)
        • Codes With Hand-Held Tester (HHT)
          • Helpful Note
          • DTC 002 - 016
          • DTC 017 - 028
          • DTC 029 - 040
          • DTC 041 - 050
          • DTC 051 - 055
          • DTC 056 - 072
          • DTC 073 - 086
          • DTC 087 - 103
          • DTC 104 - 117
          • DTC 120 - 137
          • DTC 138 - 144
        • Codes With Impulse Counter Scan Tool
          • Helpful Note
          • DTC 1 - 6
          • DTC 7 - 10
          • DTC 11 - 15
          • DTC 16 - 20
          • DTC 20 (cont.) - 22
          • DTC 22 (cont.) - 28
          • DTC 28 (cont.) - 36
          • DTC 36 (cont.) - 44
          • DTC 45 - 50
        • ETP - Electrical Test Program
          • Preparation For Test
          • Explanation of Symbols Used
          • Component Locations
          • Connection Diagram - Socket Box
          • ECM Connector Pin-Out Views
            • Connector "1" - Interior
            • Connector "2" - Engine Compartment
          • SFI - Sequential Fuel Injection Test Steps (=>)
          • IS - Ignition System Test Steps (=>)
        • HTP - Hydraulic Test Programs
          • FPIT - Fuel Pressure and Internal Leakage Test
            • Preparation For Test
            • Test Steps (=>)
          • FP - Fuel Pump Test
            • Preparation For Test
            • Test Steps (=>)
          • IT - Injector Test
            • Preparation For Test
            • Test Steps (=>)
    • Restraint Systems
    • Roll Bar Crash Deployment
    • Soft Top, Roll Bar (ST/RB) (Manual Deployment)