Adjusting Shift Rod

Adjusting shift rod

A. Models 124, 129, 140, 201, 202





Note: Park vehicle on a level surface

Shift rod (5)
Detach at selector lever (2).
Range selector lever (6)
Move into position "N".
Castle nut (4)
Slacken
Shift rod (5)
Adjust length so that approx. 1 mm play exists between the selector lever (1) and the "N" stop on the shifting gate plate.
Shift rod (5)
Attach.
Castle nut (4)
Tighten.

B. Model 210





Note: Park vehicle on a level surface

Range selector lever (1)
Move into position "N".
Shift rod (3)
Insert slack and without any tension in the head of rod (4).
Set screw (5)
Tighten to 12 Nm.