Overhaul

Preliminary work:
Glove compartment cover removed. Remove/Install Glove Compartment Cover







Glove compartment cover
lay down on suitable surface.

Screws (arrows)
screw out and remove (11 each).

Housing inner section
remove from housing outer section.

Hinges (1)
screw off on housing inner section (2 screws, 2 insert clips).

Stop levers (arrows)
unclip and remove (2 each).

Nuts (2) on housing outer section
screw off (3 each).

Wooden trim strip (3)
remove from housing.

Reassemble
in opposite order