Automatic Locking Differential (ASD) (DTC Memory [11])

Automatic Locking Differential (ASD)

Models 140.134

Preparation for DTC Readout

1. Connect impulse counter scan tool or Hand-Held Tester (HHT) to data link connector (X11/4) according to connection diagram (see section 0).

Note: Connect yellow wire from impulse counter scan tool to: ASD control module (N30/2) socket 9 BM (N16/1) socket 8.

2. Engine: at Idle.
3. Read out DTC's for ASD control module (N30/2).

Caution To erase DTC's, Engine: at Idle.

Model 140 (06/92 ) ASD without pressure reservoir
To activate the DTC memory of a new ASD control module (N30/2),
see [12]. Automatic Locking Differential (ASD) [12]

Special Tools:

Equipment: