C. Display Unit (DU) Bracket - Model 140

1. Place bracket around bottom of the center console beam on the right side. Back of the bracket goes on first. M3 x 20 screws are already inserted into bracket. Leave upper screw in original position if possible.

2. Carefully slide bracket to the top of the beam.

3. Attach the front of the bracket to the beam with existing A/C screw. Tighten bottom screw in back of bracket.

This screw is difficult to access. Use a very short, approx. 1" long, Allen wrench or a suitable ratchet. If the top screw can't be reached, leave in original position.

4. Replace wooden molding, radio and A/C control panel. Recode radio.

5. Attach display unit (DU) to bracket with two M6 x 12 screws with flat and lock washers provided. The lock washer is placed between the head of the screw and the flat washer.