B. Preparation For Installation - Model 210

Trunk:

1. Remove right interior panel.

2. Remove interior panel by fuel tank.

3. Remove left trunk hinge cover.

4. Loosen cover under trunk lid by left backup light.

Passenger compartment:

1. Remove rear seat cushion and trim on right side seat backrest.

2. Remove right side front and rear rocker trim and lower cover of B-pillar.

3. Remove front passenger side floor mat, carpet, and under dash panel.

4. Remove metal cover plate in right front passenger footwell area.

5. Remove radio.

6. Remove A/C push button unit.

7. Remove center console wood panel.

8. Remove center air vent.

9. Remove right dash speaker cover.

10. Remove wood Strip over center vent.