E. Display Unit (DU) Bracket - Model 210

1. Install bracket on dashboard above center air vent. The slit in backing plate will center over existing ridge in dash and the three holes will line up with existing holes in the dash. The dash will be compressed between the bracket and the metal backing plate.

2. Using the existing holes screw the bracket to the backing plate compressing the dash.

3. When bracket is installed, replace wood trim and right dash speaker cover. Next replace center air vent with Display Unit cable wire pulled through filed hole (Figure 10).

4. Attach display unit to bracket using two M6 x 12 screws and washers provided. Use flat and lock washers with the screws. Lock washer should be placed between the head of the screw and the flat washer. Plug cable into back of display unit (DU).

5. Reinstall center console wood panel, A/C push button unit, and radio. Recode radio.