Preparing Windshield For Installation

When previously installed windshield is used:
Cut off glue residues on windshield down to a few 10th of a millimeter. Pull off loose glue (residues not completely cut off) and wipe gluing area with lent-free rag. Do not use any type of cleaning solution.
Repair damaged primer coat.


NOTE: Allow primer to air-dry for at least 5 minutes.


When installing a new windshield:
Check windshield for scratches and damage. Apply cleaner from repair kit with lent-free rag in gluing area, then rub dry with second rag.


NOTE: Do not use cleaning solution in visual area of windshield, because it can lead to clouding.







1 Shake primer vigorously and apply in gluing area (maximum width 30 mm).


NOTE: Allow primer to air-dry for at least 5 minutes.