Camshaft Position Sensor: Adjustments

Shown on engine 111.92 for illustration purposes.

11/1 Sealing ring
11/2 Shim
L5/1 Camshaft position sensor
Arrow -> Coupling

- Rotate crankshaft until the camshaft gear segment and the camshaft position sensor (L5/1) are positioned opposite each other.

Camshaft Position Sensor, Clearance Measurement:

- Measure gap between camshaft gear segment and camshaft position sensor (L5/1) with feeler gauge.
- Specified value: 0.4 - 0.6 mm (average value 0.5 mm).

NOTE: Shims (11/2) are available as replacement parts in thicknesses from 0.1 - 1.0 mm in graduations of 1/10 mm.