General

For explanation of the symbols used in the test steps, Symbols Used For Test Equipment and Components

Central locking (CL) and Anti-Theft Alarm (ATA) can be used via the IR transmitter key as well as the mechanical key.

Activation of the PSE
RCL control module (N54) is connected to the combination control module (N10-1) via a control wire. From the combination control module (N10-1) the necessary control signals are sent via two CAN data lines to the PSE.
- ATA functions have been integrated into the PSE control module (A37).
- The DTC fault memory for the PSE control module (A37) has been integrated into the combination control module (N10-1).
- Replacement combination control module (N10-1) must be reprogrammed as noted in "Code Programming". Code Programming
- A quick function test can be accomplished using the Hand-Held Tester (HHT) for the activation of components and to read out actual values.
- Head lamp illumination (illumination time after ignition shut-off) is permanently programmed for a time period of 30 seconds.