Without Memory

Model 210/(except 210.081/281) up to 28.2.97 except code (275a) Memory package (driver's seat, steering column, mirror)





The switch for outside rearview mirror adjustment (S21s6/S21s7/S21s8) is located in the center console switch group (S21)

Adjustment:
- Key in ignition lock in position 2
- Turn switch (S21s8) to mirror to be adjusted (left or right)
- Outside rearview mirror up/down (S21s6)
- Outside rearview mirror in-out (S21s7)

NOTE: If the mirror housing has been disengaged with force, it must be reengaged with high pressure. The familiar mechanical fold-in/out feature to the front or rear after providing a certain resistance has been maintained.

General
Both outside rearview mirrors (M21/1 or M21/2) are electrically adjustable and heated.
The mirror heater is controlled by a thermostat. The heater is located on the rear of the mirror glass to which it is permanently connected.
A thermostat is also located on the rear of the mirror glass for switching the heater on and off depending on the temperature.

The outside rearview mirrors are convex increasing the field of vision.

! Accident hazard!
The image in the outside rearview mirrors is smaller due to the curvature so that objects appear to be further away than they actually are.

Function
The heater is ready for operation when the ignition key is turned
to position 2 (terminal 15).

The heater is switched on by the thermostat when the temperature of the mirror glass is < = 15 °C. The heater remains on up to a mirror glass temperature of > = 25 °C.
This procedure is repeated until the temperature of the mirror glass remains > = 15 °C.

Power consumption
Switch-on current < = 4 amperes
Continuous current > = 1.5 amperes

Network
The outside rearview mirrors (M21/1) and (M21/2) are controlled directly by the switch for outside rearview mirror adjustment (S21s6/S21s7/S21s8).