Function Test, Recalling Actual Values With HHT - Section 13
Preparation For Recalling Actual Values:
1. Fuses F1-22 and F4-3 ok,
2. Check fuse F4-8, F4-9 (for left front ESA control module (N32/1).
3. Check fuse F4-13, F4-14 (for right front ESA control module (N32/2).
4. Connect the Hand-Held Tester (HHT) to X11/4, according to diagram. Connecting Tester Or Scanner, Reading and Erasing DTC Memory
NOTE: The diagnostic trouble codes (DTC's) can only be read out and erased using the Hand-Held Tester (HHT).
Special Tools:
