Cylinder Block (Crankcase) Bores For Liner Installation

MACHINING SPECIFICATIONS OF CYLINDER BLOCK (CRANKCASE)
Bore diameter for cylinder liner in crankcase (D2): 90.000-90.035 mm
Bore diameter for cylinder liner collar in crankcase:
D1: 90.55-90.65 mm
D: 92.65-92.75
Seat of liner to center of basic bearing bore (T): 231.000-231.200 mm
Depth of liner seat (T1): 1.000-1.200 mm
Chamfer of cylinder bore at bottom of cylinder runout: 1.5 x 20°