Starter Motor: Service and Repair

Removing, installing
1 Disconnect ground cable of battery


CAUTION: On model 210, insulate the cable terminal of the ground lead to prevent unintentional contact between the disconnected ground lead and ground point W10


- Engine 602, 983 in model 461
- Engine 606, 964 in model 463

2.1 Remove bottom part of noise encapsulation


NOTE: All model 202


2.2
- All model 210

3 Disconnect electric cables (1) terminal 30
Refer to Starter below

4 Disconnect electric cables (2) terminal 50
Refer to Starter below

5 Remove bracket (6)
6.1 Remove brackets (4 and 7)
- Model 202

7 Unscrew bolts (3)
Refer to Starter below

8 Take starter (M1) dawn and out
9 Install in the reverse order

Starter: