Model 140

Group: 82

Number: 342

Date: October 1995

SUBJECT:
MODEL 140 MY. 1996
INSTALLATION OF CD CHANGER

1. Remove hardware from shipping box and verity contents.





2. Remove shipping screws (2) from CD changer. Place shipping screws in ID card bag. Cover screws holes with dust covers (Figure 1).

2a. Set orientation adjustment on sides of CD changer to vertical (V). Secure with adhesive covers.

3. Remove trunk floor mat and left wheel well liner.





4. The trunk matting is precut on the drivers side. Pull back precut area to expose factory mounting locations (Figure 2).

5. Attach CD changer to CD mounting bracket using four screws.

6. Locate and expose factory bus cable.

7. Reinstall wheel well liner.

8. Connect bus cable to CD changer.





9. Slide assembled CD unit into position in wheel well. Ensure that tab on bottom of CD mounting bracket slides into the center of clip in bottom of wheel well (arrow, Figure 2).

10. Secure top mounts with screws.

11. Install CD changer cover.

12. Install CD magazine in to CD changer unit.

13. Reinstall trunk floor mat.

14. Test function.





Parts Information





Recommended Labor Time