Installing Handset (Hs) (2/97 Production)

11. Open main armrest compartment. Locate two small recesses on underside of tray and enlarge using an awl. Close main compartment and open lid to smaller telephone compartment. Remove oblong knockout at rear of compartment by striking sharply downward with a hammer handle.

12. Insert plugs into two holes on topside of cradle. Press plugs in firmly so that they do not interfere with the handset.

13. Open main armrest compartment and fasten cradle from underneath using two M4x15 torx screws. Cradle must be positioned completely forward in compartment.

14. Route handset cable thru oblong opening.





15. Open main compartment (figure 3). Locate cover in rear of compartment. Open cover, connect handset connector to fixed connector. Route coil cord along recess so that it exits on right side opening. Close cover.