H. Speaker - Model 140

1. Cut a 76 mm (3 in.) diameter hole into the carpet of right side of center console for loudspeaker approximately 325 mm (13 in.) from side seam of carpet and 230 mm (9 in.) from floor. The inside diameter of the fastening ring of the speaker can be used as a template.

Note:
Before making cut, verify that speaker has enough clearance behind the carpet to fit.

2. Route speaker wire along the display unit cable to the right side of the center console.

3. Insert speaker into cut hole and secure by screwing on the ring on the back side.

4. Connect speaker wire and reinstall carpet, B pillar cover, door sill trims, and rear seat.